Flat bottom silos type BIN10 with sidewalls made of flat sheets of steel. Diameter of 2,29 metres. Loading capacity from 10,5 tonnes to 13,5 tonnes
Technical data of the silos type BIN10:
model |
NBIN10 |
NBIN10W |
capacity (volume) |
15,6m3 |
19,5m3 |
loading capacity for wheat with density of 750 kg/m3 |
10,5t |
13,5t |
height from the anchoring level to the loading inlet in the top of silo |
4,56m |
5,51m |
diameter |
2,29m |
2,29m |
net weight of the silo components |
560kg |
719kg |
weight and number of the floor supports made of concrete (of concrete blocks) |
28 pieces (260kg) |
28 pieces (280kg) |
Standard equipment:
- essential components:
- shell made of flat sheets of steel
- anchors for fixing to the foundation
- roof designed for snow load on the ground of 1,6 kN/m2
- set of fasteners made of steel with anti-corrosive coating
- means of access:
- roof hatch with protective covers
- external ladder with safety cage and protection against unauthorized entry
- internal ladder with safety cage
- ventilation:
- perforated floor made of steel with perforation on entire surface
- air inlet with diameter of 180mm for connecting a fan
- water pressure manometer
- loading and unloading:
- central loading inlet with a diameter of 200mm located in the roof top
- side loading inlet
- loading pipe intended to the side inlet, 2m long for the NBIN10 silo and 3m long for the NBIN10W silo
- bag filling device
Optional equipment:
- ventilation:
- fan forcing air (recommended PPZ fan)
- extraction fan model OWS250-10-200 designed to mount it on the roof
- temperature probe with 4-points of measuring
- 4,5kW air heater
- loading and unloading:
- hopper inlet mounted to the central loading inlet designed for loading the silo with an inclined screw auger conveyor
- control module of the silo model MKS-100
- underfloor screw auger conveyor model PS160 designed for silo unloading
- blower designed for conveying the grain
Recommended means of loading and unloading for silos type BIN10:
loading |
unloading |
blower designed for conveying the grain |
bag filling device |
inclined screw conveyor |
underfloor screw auger conveyor model PS160 |
vertical screw conveyor type PS220-PN |
Technical drawing of the NBIN10 silo:
Technical drawing of the NBIN10W silo:
Guidelines for producing a foundation slab for silo type BIN10:
silo type |
BIN10 |
minimum thickness of the foundation slab |
20cm |
minimum class of concrete |
C16/20 (B20) |
reinforcement |
ribbed steel class A-II cross-reinforced mesh in the middle thickness of the foundation slab Φ8 every 15cm |
number of drains (o) |
1 piece |